EEG Lab - How to
Mobile EEG, [SMARTING] Link
Wired EEG, [Brain Products] internal link
How to use MOBI EEG
Important
Only charge mobile EEG amplifier with provided black USB cable in a computer USB port, and that it is not plugged in to the cap. Otherwise it will not charge.
Light will be red when charging, turn green when charged.
STARTING UP
Computer Pin: 2021
Ensure that the mobile EEG is charged
SETTING UP CAP
Soak the hydrolink sponges for 2 hours prior to use in saline solution.
Insert sponge holder into electrode base, ensure click is heard, rotating clockwise.
Once sponges are fully soaked, gently squeeze out extra saline solution, and insert into holder.
Place the cap on participant’s head, and secure AROUND chin, not under.
Plug in amplifier (ensuring it is the correct way round – grove and protrusion line up, otherwise you will damage the pins).
Secure amplifier to cap. This is important for gyro to work properly.
SETTING UP MOBI SYSTEM
Double-click on
Streamer3
app (second purple ring on desktop).Click on connect (top left)
Select port COM (5).
Rename EEG Stream (if doing multiple streams).
Click Connect.
Options
- On main screen (bottom right)
Select desired channel layout (if not using all channels, deselect Select All Channels, click on desired channels)
Choose whether display shows impedance values or electrode names.
- Under Options (right)
Keyboard markers: activates keyboard presses
Test signal: Check whether amp is streaming correctly. Does not need to be connected to cap.
Gyro data: Select to include with EEG data
Impedance radio buttons: Impedance on ref will only measure impedance on reference electrode. Otherwise self- explanatory.
Frequency: Select desired frequency. Cannot measure impedance values at 250Hz
Note
Once impedance has been checked, switch to “no impedance measurement” to reduce noise.
Select Start streaming signals.
- Wait a few seconds, then select Show Signals to see the signal display window.
Time can be set to manual for custom timescale.
Scale can also set to manual.
Signal can be paused for inspection. This does not impact acquisition or recording.
- RECORDING: Click button on right of pause button on
Signal Display window
. Select whether
XDF
(Lab Streaming Layer compatibility, can record multiple streams) orBDF
(takes up less space, supported by more EEG processors)Select where to save file (either filepath or browse)
Select Start Recording
- RECORDING: Click button on right of pause button on
On completion, select Disconnect to put the device in idle mode (and save battery!)
Note
If update option appears on top bar or on startup, ensure that the amplifier is updated.